Mercedes-Benz GLK-Class: Checking tire pressure manually
To determine and set the correct tire pressure, proceed as follows:
- Remove the valve cap of the tire that is to be checked.
- Press the tire pressure gauge securely onto the valve.
- Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle.
- If necessary, increase the tire pressure to the recommended value ().
- If the tire pressure is too high, release air by pressing down the metal pin in the valve using the tip of a pen, for example. Then check the tire pressure again using the tire pressure gauge.
- Screw the valve cap onto the valve.
- Repeat these steps for the other tires.
Important safety notes
WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more ...See also:
Anti-trap protection
Closing a window or roof
blind onto
any part of the body can result in
serious injury.
Before closing a window or the roof
blind, ensure that no occupants have
any part of their body in a posi ...
Sport Utility Vehicle
WARNING
This Sport Utility Vehicle is designed for both on-road and off-road use. It
can go places and perform tasks for which conventional 2-wheel drive passenger cars
are not intended. Thi ...
Engine Cooling When Trailer Towing
The cooling system may temporarily overheat during severe operating conditions.
See Engine Overheating on page 10‑20. ...