Toyota RAV4: Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
1 Vehicles without smart key system: Turn the engine switch off. Vehicles with smart key system: Turn the “ENGINE START STOP” switch off. 2 The fuses are located in the following places. To check the fuses, follow the instructions below. 3 Open the fuse box cover.
Engine compartment
Type A: Push the tab in and lift the lid off.
Type B: Push the tab in and lift the lid off.
Under the instrument panel
Remove the lid.
4 After a system failure, see “Fuse layout and amperage ratings” for details about which fuse to check.
Remove the fuse with the pullout tool.
6 Check if the fuse has blown.
Type A
1 Normal fuse
2 Blown fuse
Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Type B
1 Normal fuse
2 Blown fuse
Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
Type C
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Type D
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Type E
1 Normal fuse
2 Blown fuse
Contact your Toyota dealer.
Key battery
Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with ...Fuse layout and amperage ratings
■ Engine compartment Type A (driver’s side) *1: Vehicles with towing package *2: Vehicles with 2.5 L 4-cylinder (2AR-FE) engine *3: Vehicles with 3.5 L V6 (2GR-FE) engine Type B ( ...See also:
Digital radio reception
DAB radio can significantly increase the
number of radio channels/stations available.
The DAB signals are transmitted to most major
cities, towns and motorway networks.
Digital radio is transmitte ...
Under the glove compartment
Fold aside the upholstery covering the fuse
boxes.
1. Press the cover's lock and fold it up.
2. The fuses are accessible.
Positions-fuse box A
Positions-fuse box B
...
Transfer Case Position Indicator Lights
The four-wheel drive indicator lights (4WD, 4 LOW) are
located in the instrument cluster. The NEUTRAL indicator
light is located on the transfer case switch. If there is
no indicator light on or ...