Toyota RAV4: Changing display modes
The rear view monitor display mode can be changed while the screen is on.
●To temporarily disable the rear view monitor system
Push the “AUTO” button. The indicator will turn amber.
Vehicles without smart key system
The system will be re-enabled once the engine switch is turned OFF and then turned to the “ON” position.
Vehicles with smart key system
The system will be re-enabled once the “ENGINE START STOP” switch is turned OFF and then turned to IGNITION ON mode.
●To constantly disable the rear view monitor system
Push and hold the “AUTO” button for 12 to 15 seconds. The screen will turn off and on after 6 seconds. Keep pushing the button until the screen turns back off. The indicator will flash amber.
Vehicles without smart key system
The system will not automatically turn on again after the engine switch is OFF and then turned to the “ON” position.
Vehicles with smart key system
The system will not automatically turn on again after the “ENGINE START STOP” switch is OFF and then turned to IGNITION ON mode.
●To re-enable the rear view monitor system Push the “AUTO” button. The indicator will turn green.
The rear view monitor system can be operated when
Vehicles without smart key system The shift lever is in R, the back door is fully closed and the engine switch is in the “ON” position. Vehicles with smart key system The shift lever is in R ...Selecting a language (English, French or Spanish)
1 Push and hold the “AUTO” button for 6 to 12 seconds. The screen will turn on and the indicator will turn green. 2 Push the “AUTO” button. Each time the “AUTO” button is pushed an ...See also:
Registering a portable player
Select “BT Pairing” using , and
perform the procedure for registering
a portable player. ...
Identifying your vehicle
Safety Compliance Certification Label
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe whe ...
Transporting the vehicle
The towing eyes or trailer tow hitch can be used to pull the vehicle onto a trailer
or transporter if you wish to transport it.
Turn the SmartKey to position 2 in the ignition lock.
Shift the ...