Volvo XC60: Brake Support
If the risk of collision continues to increase after the collision warning has been given, Brake Support is activated. Brake Support prepares the brake system to react quickly, and the brakes are applied slightly. This may be experienced as a light tug.
If the brakes are applied quickly, full braking effect will be provided. Brake Support also increases brake force if the system determines that the driver has not applied adequate pressure on the brake pedal.
Collision Warning
The radar sensor and the camera work
together to detect a pedestrian, stationary
vehicles and vehicles that are moving in the
same direction as your vehicle. If there is a risk
of collision wi ...
Auto-brake
If a collision is imminent and the driver has not
applied the brakes or begun to steer around the
vehicle or pedestrian, the auto-brake function
is activated without the driver pressing the
br ...
See also:
Power Door Locks
To lock all doors and the tailgate,
push the top of the master door lock
switch on either front door, pull the
lock tab rearward on the driver’s
door, or use the key on the outside
loc ...
Checklist before driving off-road
If the engine oil warning lamp lights up while the vehicle is in motion, stop
the vehicle in a safe place as soon as possible. Check the engine oil level. The
engine oil warning lamp warning mu ...
Torque Lock
Torque lock is when the weight of the vehicle puts too much force on the parking
pawl in the transmission. This happens when parking on a hill and shifting the transmission
into P (Park) is not do ...
