Subaru Forester: Auto-store (type D audio)
Using the Auto-store function, you can
automatically store 6 stations on the
current waveband (FM-AS or AM-AS) by
pressing the 
button for 1.5 seconds
or longer. Use Auto-store to quickly find
the strongest stations, for example when
traveling through different reception areas.
NOTE
- When the HD Radio function is
turned on, Auto-store cannot be used
while receiving the broadcasting station
with SPS (Supplemental Program
Service).
- When you use Auto-store, the new stations replace any stations previously stored.
- Interrupting Auto-store: If you accidentally
press the (Auto-store)
button, you can cancel the Auto-store
function before it has been completed
as follows.
– switching to the other source mode
– pressing the button
– switching to the other band
– turning the “TUNE/TRACK/CH” dial
– pressing the “SCAN” button
Selecting preset stations
1. Press the “FM/AM” button to select
FM1, FM2, FM3 (type A, B and C audio)/
FM-AS (type D audio), AM or AM-AS (type
D audio) reception.
2. Press the preferred preset button
(from
to
...
Displaying and selecting preset stations (type D audio)
1. Press the button for 1.5
seconds
or longer during AM/FM reception to
display the radio screen.
2. Operate the “TUNE/TRACK/CH” dial
to select the stations. ...
See also:
To disable TRAC and/or VSC (2WD models)
If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may
reduce power from the engine to the wheels. You may need to turn
the system off to enable you to rock the vehicle in order to free it ...
Turn signal control
• Push down to activate the left
turn signal.
• Push up to activate the right turn
signal.
...
Dinghy Towing
Front-wheel&-drive and all-wheel-drive vehicles may be dinghy towed from the
front. These vehicles can also be towed by placing them on a platform trailer with
all four wheels off of the groun ...
