Subaru Forester: Alarm system
The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the turn signal lights flash if someone attempts to break into your vehicle. The starter motor is also interrupted to prevent starting the vehicle without a key.
The system can be armed and disarmed with the remote transmitter.
The system does not operate when the key is inserted into the ignition switch.
Your vehicle’s alarm system has been set for activation at the time of shipment from the factory. You can set the system for deactivation yourself or have it done by your SUBARU dealer.
- System operation
- Activating and deactivating the alarm system
- If you have accidentally triggered the alarm system
- Arming the system
- Disarming the system
- Valet mode
- Passive arming
- Tripped sensor identification
- Shock sensors (dealer option)
Deleting old transmitter codes
The control unit of the keyless entry
system has four memory locations to store
transmitter codes, giving it the ability to
operate with up to four transmitters. When
you lose a transmitter, t ...
System operation
The alarm system will give the following
alarms when triggered.
- The vehicle’s horn will sound for 30
seconds.
- The turn signal lights will flash for 30
seconds.
If any of the doors or th ...
See also:
Gas satation information
Gas satation information
Fuel tank capacity (Reference)
15.9 gal. (60 L, 13.2 Imp. gal.)
Fuel type
Unleaded gasoline with an Octane Rating
of 87 (Research Octane Number 9 ...
Operation and function
LDW can be switched on or off by pressing the
button on the center console. A light in the button
illuminates when the function is on.
The trip computer display shows Lane Depart
Warn Standby ...
Light control and wiper control levers/switches
1) Windshield wiper
2) Mist
3) Windshield washer
4) Rear window wiper and washer switch
5) Wiper intermittent time control switch
6) Wiper control lever
7) Light control switch
8) Fo ...
