Jeep Liberty: Illuminated Approach — If Equipped
This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter.
The time for this feature is programmable on vehicles equipped with the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver’s door or all doors and the liftgate on the first
press of the UNLOCK button on the RKE transmitter. To
change the current ...
To Lock The Doors And Liftgate
Press and release the LOCK button on the RKE transmitter
to lock all doors and the liftgate. The turn signal lights
will flash and the horn will chirp to acknowledge the lock
signal. ...
See also:
Opening
Press the button on the SmartKey.
Pull handle 1.
Raise the tailgate.
Vehicles with the EASY-PACK tailgate: if you pull handle 1 and keep it in this
position, you can open the tailga ...
Hazard warning flasher
The hazard warning flasher causes the rear tail lights and front turn signal
lights to flash on and off, which serves as a warning to other drivers to exercise
caution when approaching or passin ...
Lighting control
Lighting control
1. With the headlamps on, push the control
away from the steering wheel to select high
beam. The instrument pack warning lamp
will illuminate.
Note: Do not use high beam where ...