Mercedes-Benz GLK-Class: High-beam headlamps
- To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to or or .
- Press the combination switch beyond the pressure point in the direction
of arrow 1.
In the or position, the highbeam headlamps are only switched on when it is dark and the engine is running. The indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on. - To switch off the high-beam headlamps: move the combination switch back to its normal position. The indicator lamp in the instrument cluster goes out.
Turn signals
High-beam headlamps ight turn signal High-beam flasher Left turn signal To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 ...High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. Pull the combination switch in the direction of arrow 3. ...See also:
Energy Management Feature
This vehicle has a safety belt system with an energy
management feature in the front seating positions to help
further reduce the risk of injury in the event of a head-on
accident.
This safety ...
Drip wipe
If the drip wipe function is configured, the
wipers will operate four seconds after a
wash/wipe cycle has finished, to clear any
remaining drips from the windscreen.
This function can be enabled ...
Removing the vehicle battery
Special tools are required to refit the battery
after removal, therefore battery removal and
refit should be carried out only by qualified
personnel. Consult your Dealer/Authorised
Repairer. ...