GMC Terrain: How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
If the level is below the bottom of the fill plug hole, located on the transfer case, the vehicle will need some lubricant added. Add enough lubricant to raise the level to the bottom of the fill plug hole. A fluid loss could indicate a problem; check and have it repaired, if needed.
What to Use
Refer to Recommended Fluids and Lubricants on page 11‑12 to determine what kind of lubricant to use.
Transfer Case
Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Maintenance Schedule on page 11‑3. ...Starter Switch Check
WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...See also:
Replacing fuses
There are relay/fuse boxes located in the
engine compartment, the passenger compartment,
and the cargo area.
If an electrical component fails to function, this
may be due to a blown fuse. The e ...
Refrigerant for your climate control system
Your air conditioner uses ozone friendly
refrigerant HFC134a. Therefore, the method
of adding, changing or checking the
refrigerant is different from the method for
CFC12 (freon). Consult your ...
The navigation system
Navigation instruction is by map and turn
information displayed on the touch screen and
can be complemented by voice guidance if
required. The system uses signals from Global
Positioning System (G ...