Range Rover Evoque: Vehicle information and settings menu
Vehicle information and settings menu
A number of vehicle features and display settings may be configured via the vehicle information and settings menu.
To display and navigate through the vehicle information and settings menu, operate the menu control on the steering wheel.
1. Steering wheel menu control.
- Press the up/down arrows to scroll through a list. The current selection will be highlighted.
- Press the right arrow to view a sub list.
- Press the left arrow to return to the previous menu.
- Press the OK button to select the highlighted item.
2. Select to close or return to main menu.
3. Select to view all active warning messages.
4. Select to access the Vehicle Set-up menu.The following features can be personalised:
Before making any changes to
the
vehicle set-up, you must ensure
that you have read and fully
understood the relevant sections
of the handbook. Failure to do so
could lead to serious injury or
death.
- Blind spot monitor.
- Speed warning.
- High beam assist.
- Passenger airbag.
- Alarm sensors.
- Cruise Eco data - Reverse-dip mirrors.
- Easy entry/exit.
- 2-stage locking.
- Audible lock warning - Winter wiper park.
- Drive-away locking.
- Headlamp delay.
5. Select to access the Trip Computer menu.
6. Select to access the Display Settings menu.The following features can be personalised: - Language for message centre display.
- Temperature units.
- Appearance of the instrument panel.
7. Select to access the vehicle Service Menu.
Can be accessed only when the engine is not running.
Note: Some personalisation options may not be available in all markets.
READ NEXT:
Warning and information messages
Do not ignore warning
messages.Take
appropriate action and, when
necessary, seek qualified assistance
before driving the vehicle.
If more than one message is active, each is
displayed in turn
Trip computer
The computer memory stores data for a
journey or series of journeys until it is reset to
zero.
The displayed information is for guidance only,
as it can be affected by traffic, road and
weather c
SEE MORE:
Voice training
This is a feature designed to enable the system
to better recognise the vocal characteristics of
a user, once the training has been completed.
To carry out Voice training:
- Select Setup from the Home menu.
- Select Voice and from the Setup menu.
- Select Voice training from the Voice
setting
Shock Absorber and Spring Assembly Vehicles With:
Dynamic Suspension
Special Tool(s)
JLR-204-804
Lever, Wheel Knuckle
General Equipment
Transmission jack
Wooden Block
Removal
CAUTIONS:
Nuts and bolts must be tightened with the weight of the vehicle on the
suspension.
LH illustration shown, RH is similar.
NOTES:
Removal steps in this procedure may contain instal
