Volvo XC60: Turn signals
Turn signals
When changing lanes
1 The driver can automatically flash the turn signals 3 times by moving the turn signal lever up or down to the first position and releasing it.
When turning
2 Move the lever as far up or down as possible to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
NOTE
• This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out
turn signal bulb.
Hazard warning flashers
Location of the hazard warning flasher button
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
To activate the flashers, press the button
i ...
Interior lighting, front
Light switches, front roof lighting
1 Drivers side front reading light, on/off.
2 Passenger's side front reading light, on/off.
3 Overhead courtesy lighting.
The lighting in the front part of th ...
See also:
What Causes Corrosion?
Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.
The most common causes are:
• Road salt, dirt, and moisture accumulation.
• Stone and ...
Fuel Economy Mode
Vehicles with a 2.4L engine have a Fuel Economy Mode. When engaged, fuel economy
mode can improve the vehicle's fuel economy
Press the “eco” (economy) button by the shift lever to turn th ...
Vehicle Dynamics Control operation indicator light
The indicator light flashes during activation
of the skid suppression function and
during activation of the traction control
function.
NOTE
- The light may remain illuminated for
a short pe ...
