Subaru Forester: To hook the top tether
1. Remove the headrest at the windowside seating position where the child restraint system has been installed with the lower anchorages or seatbelt; lift up the headrest while pressing the release button. Store the headrest in the cargo area. Avoid placing the headrest in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn.
2. For both window-side seating positions, remove the cover for the appropriate upper anchorage.
3. Attach the child restraint top tether hook to the appropriate upper anchorage.
4. Tighten the top tether securely.
Please contact your SUBARU dealer if you have any question regarding the installation of a child restraint system.
Always remove the headrest when mounting a child restraint system with a top tether. Otherwise, the top tether cannot be fastened tightly.
Anchorage location
1) For right seat 2) For center seat 3) For left seat There is an anchorage located on the rear edge of the ceiling above each seating position. ...SRS airbag (Supplemental Restraint System airbag)
*SRS: This stands for supplemental restraint system. This name is used because the airbag system supplements the vehicle’s seatbelts. Your vehicle is equipped with a crash sensing and diagn ...See also:
To Unlatch The Liftgate Flipper Glass
Press the FLIPPER GLASS button twice to unlatch the
liftgate flipper glass.
WARNING!
To avoid injury stand back when opening. Glass will
automatically rise. ...
Introduction
Two remote keys or optional Personal Car
Communicators (PCC) are provided with your
vehicle. They enable you to unlock the doors
and tailgate, and also function as ignition keys
to start the v ...
Opening
Switch off the engine.
emove the SmartKey from the ignition lock.
KEYLESS-GO: open the driver’s door. This switches the ignition to position 0,
which corresponds to having removed the Smar ...