Subaru Forester: To disengage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pause for 1 second and flash the turn signal lights 1 time indicating that the system has exited service mode.
NOTE
When taking your vehicle in for service,
it is recommended that you inform the
service personnel that your vehicle is
equipped with a remote control start
system.
To engage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pau ...Remote transmitter programming and programmable feature option
New transmitters can be programmed to the engine starter system in the event that remote transmitters are lost, stolen or damaged. The remote engine start system also has one programmable fe ...See also:
Help Features
To hear general HFL information,
including help on using HFL
buttons, Voice control, or making
a call, say ‘‘Tutorial.’’
For help at any time, including a
list of available commands, ...
Audible/visual alarm signal
• An audible alarm signal is given by a battery
powered siren. The alarm cycle lasts
for 30 seconds.
• The visual alarm signal is given by flashing
all turn signals for approximately 5 minu ...
Media Center 130 (Sales Code RES)
NOTE: The radio sales code is located on the lower right
side of the radio faceplate.
Media Center 130 (RES) ...