Volvo XC60: Tire sealing system–temporarily repairing a flat tire
Tire sealing system–temporarily repairing a flat tire
Temporarily repairing a flat tire is done in two stages:
• Stage 1: The hole is sealed by pumping sealing compound into the tire. The car is then driven a short distance to distribute the sealing compound in the tire.
NOTE
Do not remove any foreign objects (nails,
etc.) from the tire before using the sealing
system.
• Stage 2: The tire’s inflation pressure is checked and adjusted if necessary.
WARNING
• Never leave the tire sealing system
unattended when it is operating.
• Keep the tire sealing system away from
children.
• Be sure the vehicle is parked safely off
the road and away from moving traffic.
• Apply the parking brake.
- Stage 1: Sealing the hole
- Stage 2: Checking inflation pressure
- Replacing the sealing compound container
Tire sealing system–overview
1 Speed limit sticker
2 On/Off switch
3 Electrical wire
4 Bottle holder (orange cover)
5 Protective hose cover
6 Air release knob
7 Hose
8 Bottle with sealing compound
9 Air pressure gauge
...
Stage 1: Sealing the hole
1. Open the cover on the tire sealing kit.
2. Peel off the speed limit sticker and affix it
to the steering wheel hub where it will be
clearly visible to the driver.
3. Ensure that the on/off sw ...
See also:
Engine exhaust gas (carbon monoxide)
- Never inhale engine exhaust gas.
Engine exhaust gas contains
carbon monoxide, a colorless
and odorless gas which is dangerous,
or even lethal, if inhaled.
- Always properly maintain the ...
Power Windows
WARNING
Leaving children in a vehicle with the keys is dangerous for many reasons. Children
or others could be badly injured or even killed. They could operate the power windows
or other controls ...
Maintenance schedule
Chart symbols: I- Inspect these items and their related parts. If necessary,
correct, clean, refill, adjust of replace. R- Replace or change L- Lubricate. (1)
Refer to the lubricant and cool ...
