Toyota RAV4: Taking out the jack
Disengage the claws and remove the cover.
1 Loosen
2 Tighten
Loosen and take out the jack.
If you have a flat tire (vehicles with standard tires)
Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift th ...Taking out the tool bag
Disengage the claws and remove the cover. Take out the tool bag. ...See also:
Opening and closing the hood
1 Pull the lever located under the left side of
the dash to release the hood lock. An information
symbol will illuminate when the
hood is open.
2 Lift the hood slightly. Press the release
c ...
Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the status of the system. Refer to Airbag readiness section in
the Instrument Cluster chapter. Routine maintenance of t ...
Storing wheels and tires
When storing complete wheels (tires mounted
on rims), they should be suspended off the
floor or placed on their sides on the floor.
Tires not mounted on rims should be stored on
their sides or ...