Volvo XC60: Switching to another device
It is possible to switch among paired Bluetooth® devices that are in the vehicle. To do so:
1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.
2. Be sure the external device's Bluetooth® function is turned on and that the device is "discoverable." See the devices user's guide if necessary.
3. Press OK/MENU.
4. Turn TUNE to Change Bluetooth device and confirm by pressing OK/ MENU.
> After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be displayed.
5. Select the device to be connected by turning TUNE and pressing OK/MENU to confirm.
> The external device will be connected to the infotainment system.
Audio files can now be selected using the
buttons in the center console or on
the steering wheel keypad.
Automatic connection
When the Bluetooth® function is active and the
most recently paired device is within range, it
is automatically connected. When the infotainment
system searches for the most recently
paired d ...
Removing a paired device
1. In Bluetooth mode, press OK/MENU.
2. Turn TUNE to Remove Bluetooth
device and press OK/MENU.
3. Select the device to be removed by turning
TUNE and confirm by pressing OK/
MENU.
> A que ...
See also:
Infants
Infants up to at least 1 year old should be placed
in a rear-facing child restraint. NISSAN recommends
that infants be placed in child restraints
that comply with Federal Motor Vehicle Safety
...
Engine Break-In Recommendations
A long break-in period is not required for the engine and
drivetrain (transmission and axle) in your vehicle.
Drive moderately during the first 300 miles (500 km).
After the initial 60 miles (100 ...
Activating RSE
The RSE system can be activated using controls
on the front or rear screens.
From the front seat, press MEDIA (see the following
illustration) and select RSE.
From the rear seat, press the scree ...
