GMC Terrain: Starting the Engine Using Remote Start
To start the engine using the remote start feature:
1. Press and release on the RKE transmitter.
2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.
3. The key must be inserted and turned to ON/RUN before driving.
The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.
Remote Vehicle Start
The vehicle may have this feature that allows you to start the engine from outside the vehicle. (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. ...Extending Engine Run Time
For a 10-minute extension, repeat Steps 1 and 2 while the engine is still running. The remote start can be extended once. When the remote start is extended, the second 10 minutes will start immedia ...See also:
Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual transmission)
and turn engine ...
Fog lamp control (if equipped)
The headlamp control also operates
the fog lamps. The fog lamps can be
turned on when the headlamp
control is in the positions
and the high beams are
not turned on.
Pull the headlamp control ...
Charging the battery
WARNING
Never charge a battery still installed in the vehicle unless
a battery charger unit approved by Mercedes-Benz is being used. Gases may escape
during charging and cause explosions tha ...