Subaru Forester: Starting the engine
Do not operate the starter motor continuously for more than 10 seconds.
If the engine fails to start after operating the starter for 5 to 10 seconds, wait for 10 seconds or more before trying again.
NOTE
It may be difficult to start the engine
when the battery has been disconnected
and reconnected (for maintenance
or other purposes). This difficulty
is caused by the electronically
controlled throttle’s self-diagnosis
function. To overcome it, keep the
ignition switch in the “ON” position
for approximately 10 seconds before
starting the engine.
Preparing to drive
You should perform the following checks
and adjustments every day before you
start driving.
1. Check that all windows, mirrors, and
lights are clean and unobstructed.
2. Check the appearance a ...
MT models
1. Apply the parking brake.
2. Turn off unnecessary lights and accessories.
3. Press the clutch pedal to the floor and
shift the shift lever into neutral. Hold the
clutch pedal to the floor whil ...
See also:
HD Radio indicators
Each indicator illuminates under the following
conditions.
- The indicator illuminates while
the
digital broadcast is received during the HD
Radio ON mode.
- The “TAG” indicator illumin ...
Towing Requirements – Trailer Brakes
− Do not interconnect the hydraulic brake system or
vacuum system of your vehicle with that of the trailer.
This could cause inadequate braking and possible
personal injury.
− An ele ...
Protection
For appearance purposes, you may wish to protect the
acrylic (cloth) top periodically. Afabric protectant such as
Scotchguard is suggested. The top should be clean and
dry before application of ...
