Nissan Rogue: Setting hazard indicator and horn mode
This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.
In hazard indicator and horn mode, when the LOCK button 1 is pushed, the hazard indicator flashes twice and the horn chirps once.
When the UNLOCK button 2 is pushed, the hazard indicator flashes once.
If the horn chirp is not necessary, you can switch to hazard indicator only mode by following the switching procedure.
In hazard indicator only mode, when the LOCK button is pushed, the hazard indicator flashes twice. When the UNLOCK button is pushed, neither the hazard indicator nor the horn operates.
Switching procedure:
To switch the hazard indicator and horn operation, push the LOCK 1 and UNLOCK 2 buttons on the keyfob simultaneously for more than 2 seconds.
- When the hazard indicator mode is set, the hazard indicator flashes 3 times.
- When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.
Using panic alarm
If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button 3 on the keyfob for more than 1 second. 2. The theft warn ...Intelligent Key system (if so equipped)
- Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...See also:
Right control panel
Back button
...
Message memory
The message memory allows you to call up previous display messages.
Press or
on the steering wheel to select
the Serv. menu. If there are display messages, the multifunction display shows
...