Mitsubishi Outlander: Seat belt inspection
● Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic
parts. Replace the belt assembly if defective.
● A dirty belt should be cleaned with neutral detergent in warm water. After rinsing
in water, let it dry in the shade. Do not attempt to bleach or re-dye the belts
because this affects their characteristics.
WARNING:
● We recommend you to have all seat belt assemblies including retractors and attaching
hardware inspected after any collision. We recommend that seat belt assemblies in
use during a collision be replaced unless the collision was minor and the belts
show no damage and continue to operate properly.
● Do not attempt to repair or replace any part of the sat belt assemblies; we recommend
you to have this work done by a MITSUBISHI MOTORS Authorised Service Point. Incorrect
repair or replacement result in serious injury in the event of a collision.
● Once the pre-tensioner has activated, it cannot be re-used. It must be replaced
together with the retractor.
Child restraint
When transporting children in your vehicle, some type of child restraint system should always be used according to the size of the child. This is required by law in most countries. The regulations ...Supplemental restraint system (SRS)-airbag
The information for SRS airbags includes important information concerning the driver’s and front passenger’s airbags, the side airbags and the curtain airbags. The SRS airbags are designed to ...See also:
Fabric/Carpet
Start by vacuuming the surface using a soft brush attachment. If a rotating brush
attachment is being used during vacuuming, only use it on the floor carpet. Before
cleaning, gently remove as much ...
Calling up a stored parking position setting
Turn the SmartKey to position 2 in the ignition lock.
Adjust the exterior mirror on the frontpassenger side with the corresponding
button ().
Engage reverse gear. The exterior mirror on the ...
Playback of MP3 Files
When a medium containing MP3 data is loaded, the
radio checks all files on the medium. If the medium
contains a lot of folders or files, the radio will take more
time to start playing the MP3 fi ...