Subaru Forester: Scan tuning (SCAN)
If you press the “SCAN” button briefly (type A, B and C audio)/continuously (type D audio), the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for 5 seconds (type A, B and C audio)/10 seconds (type D audio) while displaying the frequency, after which scanning will continue until the entire band has been scanned.
Press the “SCAN” button again to cancel the SCAN mode and to stop at any displayed channel.
Automatic tuning may not function properly if the station reception is weakened by distance from the station or proximity to tall buildings and hills.
Seek tuning (SEEK)
Type A and B audio:
Type C audio:
Type D audio:
If you press the “” or “”
button briefly,
the radio will automatically search for a
receivable station and stop at the first one ...
PTY (Program type) group tuning only FM reception)
Press the indicated button to change to
the PTY selection mode. At this time, the
PTY group that you are currently listening
to (type A, B and C audio)/that you
selected the last time (type ...
See also:
Normal Starting
NOTE: Normal starting of either a cold or a warm
engine is obtained without pumping or pressing the
accelerator pedal.
Turn the ignition switch to the START position and
release when the engine ...
Automatic transaxle
Checking the automatic transaxle fluid level The automatic transaxle fluid level
should be checked regularly. Keep the vehicle on the level ground with the parking
brake applied and check the fl ...
Vanity mirror
Keep the vanity mirror cover closed
while the car is being driven to avoid
being temporarily blinded by the
glare of bright light.
Vanity mirror
To use the vanity mirror, swing down th ...
