Mercedes-Benz GLK-Class: Resetting to factory settings
For safety reasons, the Daytime Running Lights: function in the Lights submenu is only reset when the vehicle is stationary.
- Press the or button on the steering wheel to select the Settings menu.
- Press the or button to select the Factory Setting submenu.
- Press the button to confirm. The Reset All Settings? message appears.
- Press the or button to select No or Yes.
- Press the button to confirm the selection.
If you select Yes, the multifunction display shows a confirmation message.
Convenience
Activating/deactivating the EASYENTRY/ EXIT feature You can use the Easy Entry/Exit: function to activate or deactivate the EASY ENTRY/ EXIT feature (). WARNING You must make sure no one can ...Display messages
...See also:
Lubrication system
*: The engine oil capacity is a reference quantity to be used when
exchanging.
Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
■ Engine ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks. ...
Standby mode (temporary deactivation)
Press to temporarily deactivate
cruise control
(put it in standby mode). The set speed, for
example 55 mph, is then shown in parentheses.
The previously set speed and time interval are
resum ...