Subaru Forester: Replacing an air filter
1. Remove the glove box.
(1) Open the glove box.
(2) Remove the damper shaft from the glove box.
(3) Pull out the glove box.
2. Remove the air filter.
3. Replace the air filter element with a new one.
The arrow mark on the filter must point UP.
4. Reinstall the glove box, and connect the damper shaft.
5. Close the glove box.
6. LABEL installation
(1) Fill out the information on the
service label (small).
1) Service label
(2) Attach the service label to the driver’s side door pillar.
1) Caution label
(3) Attach the caution label next to the air filter as shown in the illustration.
Air filtration system
Replace the filter element according to the replacement schedule as follows. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditio ...Audio
...See also:
Traction Control System (TCS)
The traction control system limits wheel spin. The system is on when the vehicle
is started.
○ To turn off traction control, press and release
located on the console.
illuminates and the ...
Exhaust check
WARNING
Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains
carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
Do not run the engi ...
Odometer/Trip meter
Type A
1) Trip knob
Type B
1) Trip knob
This meter displays the odometer and two
trip meters when the ignition switch is in
the “ON” position.
If you press the trip knob when the igni ...