GMC Terrain: Remote Keyless Entry (RKE) System - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Remote Keyless Entry (RKE) System

The Remote Keyless Entry (RKE) transmitter will work up to 60m(195 ft) away from the vehicle.

Press this button to extend the key. The key can be used for the ignition and

Press this button to extend the key. The key can be used for the ignition and all locks.

or all doors. : Press to unlock the driver door or all doors.

Lock and unlock feedback can be personalized. : Press to lock all doors.

Lock and unlock feedback can be personalized.

press and hold until the liftgate begins to move to open the liftgate.: For vehicles with the power liftgate, press and hold until the liftgate begins to move to open the liftgate.

For vehicles without the power liftgate, first press to unlock the liftgate., then press and hold : Press and release to locate the to unlock the liftgate.

vehicle. Press and hold for at least two seconds to sound the panic alarm. Press : Press and release to locate the vehicle. Press and hold for at least two seconds to sound the panic alarm. Press See Keys on page 2‑2 and Remote Keyless Entry (RKE) System Operation on page again to cancel the panic alarm.

See Keys on page 2‑2 and Remote Keyless Entry (RKE) System Operation on page 2‑3.

    Initial Drive Information
    This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can ...

    Remote Vehicle Start
    With this feature the engine can be started from outside of the vehicle. ...

    See also:

    Before checking or servicing in the engine compartment
    - Always stop the engine and set the parking brake firmly to prevent the vehicle from moving. - Always let the engine cool down. Engine parts become very hot when the engine is running and ...

    How to preset channels
    1. Press the “SAT” button to select SAT1, SAT2 or SAT3 reception. 2. Select the desired channel. 3. Press one of the preset buttons (from to ) for more than 1.5 seconds to store the cha ...

    Engine oil
    NOTE - The engine oil consumption rate is not stabilized, and therefore cannot be determined until the vehicle has traveled at least several thousand miles (kilometers). Even after break-in, ...