Subaru Forester: Rear seatbelts (except rear center seatbelt) - Fastening the seatbelt - Seatbelts - Seat, seatbelt and SRS airbags - Subaru Forester Owner's ManualSubaru Forester: Rear seatbelts (except rear center seatbelt)

1. Sit well back in the seat.

2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving a strong pull on it, then pull it out slowly again.

3. Insert the tongue plate into the buckle

3. Insert the tongue plate into the buckle until you hear a click.

4. To make the lap part tight, pull up on

4. To make the lap part tight, pull up on the shoulder belt.

5. Place the lap belt as low as possible on your hips, not on your waist.

    Unfastening the seatbelt
    Unfastening the seatbelt Push the button on the buckle. Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door. ...

    Unfastening the seatbelt
    Unfastening the seatbelt Push the button on the buckle. Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door. ...

    See also:

    Head Restraints
    Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is ...

    Check Fuel Cap Message
    Your vehicle’s onboard diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘CHECK FUEL CAP’’ message ...

    Remote control
    A remote control is included with the RSE system, which can be used to control both screens in the rear seat as well as other infotainment system functions. See page 254 for more detailed infor ...