Range Rover Evoque: Rear lamp bulbs
1. Remove the two fixings.
2. Direction indicator.
3. Reversing lamp
Turn the relevant bulb holder counter
clockwise and pull to remove from the lamp
unit. Grip the holder then press the bulb into
the holder and turn counter clockwise to
release the bulb. Pull the bulb up to remove.
READ NEXT:
Access to the rear fog lamp
requires
special tools and should be undertaken
only by a qualified technician. If in
doubt, consult your Land Rover
Dealer/Authorised Repairer.
Remove any heavy deposits of
mud and
dirt with a hose before washing the
vehicle.
Never aim a hose water jet directly at
the engine air intake, heater air intakes,
body seals or at any compone
Stubborn stains such as tar spots and grease
may require the use of white spirt. After use,
ensure the area is washed immediately with
warm soapy water to remove all traces of the
spirit.
SEE MORE:
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. Refer to: Standard Workshop Practices (100-00 General Information,
Description and Operation).
3. Refer to: Front Seat Co
NOTE: Park assist is not available to all markets.
COMPONENT LOCATION - SHEET 1 OF 4 - PARKING AID AND PARK ASSIST
TCM (transmission control module)
CJB (central junction box)
Touch Screen Display (TSD)
Integrated Audio Module (IAM)
ABS (anti-lock brake system) module
Audio power amplifier (
© 2011-2024 Copyright www.rrevoque.org