Volvo XC60: Re-installing the wheel - Taking out the spare wheel - Changing a wheel - Wheels and tires - Volvo XC60 Owner's ManualVolvo XC60: Re-installing the wheel

1. Clean the contact surfaces on the wheel and hub.

2. Lift the wheel and place it on the hub.

Tighten the lug nuts
Tighten the lug nuts

3. Install the wheel nuts and tighten handtight.

Using the lug wrench, tighten crosswise until all nuts are snug.

4. Lower the vehicle to the ground and alternately tighten the bolts crosswise to 103 ft. lbs. (140 Nm).

5. Install the wheel cover (where applicable).

The opening in the wheel cover for the tire's inflation valve must be positioned over the valve.

    Changing a wheel
    1. Apply the parking brake and put the gear selector in P. 2. Take out the jack*, lug wrench*, the towing eyelet and the wheel cover removal tool* stowed under the floor of the trunk. 3. Remov ...

    Tire Pressure Monitoring System (TPMS)
    Introduction NOTE USA – FCC ID: KR5S122780002 This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful int ...

    See also:

    General maintenance
    During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smell, b ...

    Introduction
    Two remote keys or optional Personal Car Communicators (PCC) are provided with your vehicle. They enable you to unlock the doors and tailgate, and also function as ignition keys to start the v ...

    Checking the engine oil
    The oil level should be checked at regular intervals, particularly during the period up to the first scheduled maintenance service. • See page 356 for oil specifications. • Refer to the Warr ...