Jeep Liberty: Radio FM
To switch to the FM band, say “FM” or “Radio FM”. In
this mode, you may say the following commands:
• “Frequency #” (to change the frequency)
• “Next Station” (to select the next station)
• “Previous Station” (to select the previous station)
• “Menu Radio” (to switch to the radio menu)
• “Main Menu” (to switch to the main menu)
Radio AM
To switch to the AM band, say “AM” or “Radio AM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select the ...Satellite Radio
To switch to satellite radio mode, say “Sat” or “Satellite Radio”. In this mode, you may say the following commands: • “Channel Number” (to change the channel by its spoken number) ...See also:
Steps for Determining Correct Load Limit
1. Locate the statement “The combined
weight of occupants and
cargo should never exceed XXX
pounds” on your vehicle’s placard.
2. Determine the combined weight
of the driver and passeng ...
Checking the brake pedal reserve distance
1) More than 2.56 in (65 mm)
Depress the pedal with a force of approximately
66 lbf (294 N, 30 kgf) and measure
the distance between the upper surface of
the pedal pad and the floor.
When th ...
Tire pressure monitor warning messages
If the tire pressure monitor detects a significant pressure loss on one or more
tires, a warning message is shown in the multifunction display. A warning tone also
sounds and the tire pressure war ...