Nissan Rogue: Precautions on cruise control
- If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver.
- If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
- If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer.
- The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.
Do not use the cruise control when
driving under the following conditions:
- when it is not possible to keep the
vehicle at a set speed
- in heavy traffic or in traffic that
varies in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice,
etc.)
- in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
Cruise control
...Cruise control operations
1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. MAIN (ONВ·OFF) switch The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your f ...See also:
Parksense rear park assist
ParkSense Rear Park Assist is a driver aid that senses for
obstacles behind the vehicle and provides both visible
and audible warnings to indicate the range of the object.
System Usage Precaution ...
Tire chains
Tire chains cannot be used on your
vehicle because of the lack of
clearance between the tires and
vehicle body.
NOTE
When tire chains cannot be used, use
of another type of traction dev ...
Adjusting the steering wheel manually
elease lever
To adjust the steering wheel height
To adjust the steering wheel position (fore-and-aft adjustment)
Push release lever 1 down completely. The steering column is unlocked.
...