Hyundai Tucson: Power steering fluid level - Do-it-yourself maintenance - Hyundai Tucson Owner's ManualHyundai Tucson: Power steering fluid level

The power steering fluid level should be checked

The power steering fluid level should be checked regularly. To check the power steering fluid level, be sure the engine is "OFF", then check to make certain that the power steering fluid level is between the "MAX" and "MIN" level markings on the fluid reservoir.

NOTE: Grinding noise from the power steering pump may be heard immediately after the engine is started in extremely cold conditions (below - 4В°F). If the noise stops during warm up, there is no abnormal function in the system. It is due to a power steering fluid characteristic in extremely cold conditions.

Recommended Fluid

Use PSF-3 type fluid

NOTE: Do not start the engine when the power steering oil reservoir is empty.

POWER STEERING HOSES

It is suggested that you check the power steering hose connections for fluid leakage at those intervals specified in the vehicle maintenance schedule in Section 5. The power steering hoses should be replaced if there is severe surface cracking, pulling, scuffing or worn spots. Deterioration of the hose could cause premature failure.

FOR MORE INFORMATION ABOUT YOUR HYUNDAI

If you desire additional information about maintaining and servicing your Hyundai, you may purchase a factory Shop Manual at your Hyundai dealer's parts department. This is the same manual used by dealership technicians and while it is highly technical it can be useful in obtaining a better understanding of your car and how it works.

    Checking electric cooling fans
    WARNING: The cooling fan is controlled by engine coolant temperature and may sometimes operate even when the engine is not running. Use extreme caution when working near the blades of the co ...

    Headlight aiming adjustment
    Before performing aiming adjustment, make sure of the following. 1. Keep all tires inflated to the correct pressure. 2. Place the vehicle on level ground and press the front bumper & rear ...

    See also:

    Selecting trailer ball
    Use the correct trailer ball for your application. 1 Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. 2 Ball diameter Matches the size of the trailer ...

    Information and assistance
    It is recommended that when you sell or dispose of the vehicle, the programmed HomeLink buttons be erased for security purposes. For information on the range of available compatible products or ...

    Wheel changing
    WARNING - THAT NO PERSON SHOULD PLACE ANY PORTION OF THEIR BODY UNDER A VEHICLE THAT IS SUPPORTED BY A JACK. Position the jack from the side of the vehicle, in line with the appropriate jacking ...