Mitsubishi Outlander: Parking brake
To park the vehicle, first bring in to a complete stop, fully engage the parking brake.
To apply
1- Pull the lever up without pushing the button at the end of hand grip.
To release
1- Pull the lever up slightly. 2- Push the button at the end of hand grip. 3- Push the lever downward.
CAUTION:
● Before driving, be sure that the parking brake is fully released and brake warning
lamp is off. If you drive without the parking brake fully released, “RELEASE PARKING
BRAKE” will appear on the information screen in the multi-information display. If
a vehicle is driven without releasing the parking brake, the brakes will be overheated,
resulting in ineffective braking and possible brake failure.
Running-in recommendations
During the running-in period for the first 1,000 km (600 miles), it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future econo ...Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position. Parking on a hill To prevent the vehicle from rolling, follow these pro ...See also:
Fuel gauge
The gauge A indicates the approximate fuel
level in the tank.
The gauge may move slightly during braking,
turning, acceleration, or going up or down hills.
Refill the fuel tank before the gaug ...
Vehicle tool kit
The vehicle tool kit can be found in the stowage well under the trunk floor.
X To remove the cargo compartment stowage tray/cover: lift up the floor of the
cargo compartment ().
Remove stowag ...
Wiper blades
Wiper blade maintenance Commercial hot waxes applied by automatic car washes
have been known to make the windshield difficult to clean. Contamination of either
the windshield or the wiper blades ...