Range Rover Evoque: Park

Use when the vehicle is parked. The transmission will be locked.

should be Park (P) or Neutral (N) should be engaged and the parking brake applied when the vehicle is stationary.
Always select P and switch off the ignition before leaving the vehicle.

the vehicle Never select Park (P) when the vehicle is in motion.

READ NEXT:

 Reverse gear

Never select Reverse (R) when the vehicle is in forward motion. Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied. Rotate to R.

 Neutral

Disconnects drive to the wheels. Use the parking brake while N is selected. Do not use for vehicle recovery purposes.

 Drive

Never select a forward gear when the vehicle is in rearward motion. Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.

SEE MORE:

 Shock Absorber and Spring Assembly Vehicles With: Dynamic Suspension

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle General Equipment Transmission jack Wooden Block Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTE: Some variation in the illustratio

 Touch Screen (TS)

Touch Screen Display (FCDIM) The table below lists all Diagnostic Trouble Codes (DTCs) that could be logged in the Multifunction Display Module, for additional Diagnosis and Testing information refer to the relevant Diagnosis and Testing Section. For additional information, refer to: Information

© 2011-2024 Copyright www.rrevoque.org