Volvo XC60: Operation
Chassis settings
Use the buttons in the center console to change setting. The setting in use when the engine is switched off is activated the next time the engine is started.
Advanced
In this mode, body sway in curves is minimal
and steering response is very direct. Gear shifting
is done at high rpm in each gear for
dynamic and active driving. ...
Speed-dependent steering force
Steering force increases with the speed of the
vehicle to give the driver enhanced sensitivity.
At low speed the vehicle is easy to steer in
order to facilitate parking, etc.
Steering force can ...
See also:
Tire Labeling
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Tire Size
Whenever tires are replaced, they
should be replaced with tires o ...
Mud and water
If you must drive through high
water, drive slowly. Traction or
brake capability may be limited.
When driving through water,
determine the depth; avoid water
higher than the bottom of the hubs
...
Trip computer
The computer memory stores data for a
journey or series of journeys until it is reset to
zero.
The displayed information is for guidance only,
as it can be affected by traffic, road and
weather c ...
