Subaru Forester: Operating tips for heater and air conditioner
- Cleaning ventilation grille
- Efficient cooling after parking in direct sunlight
- Lubrication oil circulation in the refrigerant circuit
- Checking air conditioning system before summer season
- Cooling and dehumidifying in high humidity and low temperature weather conditions
- Air conditioner compressor shut-off when engine is heavily loaded
- Refrigerant for your climate control system
Temperature sensors
Temperature sensors
1) Interior air temperature sensor
2) Solar sensor
The automatic climate control system
employs several sensors. These sensors
are delicate. If they are not treated
pro ...
Cleaning ventilation grille
Cleaning ventilation grille
Always keep the front ventilation inlet grille
free of snow, leaves, or other obstructions
to ensure efficient heating and defrosting.
Since the condenser is locate ...
See also:
Programming A Non-Rolling Code
For programming Garage Door Openers manufactured
before 1995.
1. Turn the ignition switch to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)
away from the HomeLink ...
Correct use of the seat belts
WARNING
USE SEAT BELTS PROPERLY
Seat belts can only work when used properly. Never wear seat belts in any
other way than as described in this section, as that could result in serious
i ...
Brake fluid level warning
This light illuminates when the brake fluid
level has dropped to near the “MIN” level
of the brake fluid reservoir with the ignition
switch in the “ON” position and with the
parking br ...
