Volvo XC60: Manual operation
1. Opening the sun shade: Pull the control back to the first stop (the manual open position) and hold it until the sun shade has opened to the position of your choice.
2. Opening the rear edge of the laminated panoramic roof: Pull the control back to the first stop (the manual open position) a second time to open the rear edge of the laminated panoramic roof.
3. Opening the front glass section: Pull the control back to the first stop (the manual open position) a third time and hold it until the laminated panoramic roof has opened to the position of your choice.
Perform this procedure in reverse order to close the laminated panoramic roof and/or sun shade.
NOTE
For manual opening, the sun shade must
first be fully open before it will be possible
to open the laminated panoramic roof.
When closing, the laminated panoramic roof
must be fully closed before the sun shade
can be closed.
Automatic operation
1. To open the sun shade completely, pull the
control as far back as possible (to the auto
open position) and release it.
2. To fully open the laminated panoramic
roof, pull the control as far ...
Tilt position
Tilt position, raised at the rear edge
1 Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
2 Close by pulling the rear edge of the control ...
See also:
Hill start assist warning light
Refer to “Hill start assist warning light (MT
models)”. ...
Spin control (SC)
The spin control function is designed to help
prevent the drive wheels from spinning while
the vehicle is accelerating. ...
Radiator and condenser
Check the radiator and condenser, and clear any foreign objects.
If either of the above parts are extremely dirty or you are not sure of
their condition, have your vehicle checked by your Toyota dea ...
