Nissan Rogue: Locking doors - Intelligent Key operation - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Locking doors

1. Turn the ignition switch to the LOCK position.1
2. Carry the Intelligent Key with you.
3. Close all the doors.2
4. Push the door handle request switch (driver’s or front passenger’s) A or the lift gate request switch B while carrying the Intelligent Key with you.3
5. All the doors and the lift gate will lock.
6. The hazard indicator flashes twice and the outside chime sounds twice.

1: Doors will lock with the request switch while the ignition switch is in the ACC or ON position.

2: Doors will not lock with the request switch while any door is open.

3: Doors will not lock with the request switch when the Intelligent Key is left inside the vehicle.

However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.

    Intelligent Key operation
    You can lock or unlock the doors without taking the key out from your pocket or bag. When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle ...

    Unlocking doors
    1. Push the door handle request switch A or the lift gate request switch B while carrying the Intelligent Key with you. 2. The hazard indicator flashes once and outside chime sounds once. The c ...

    See also:

    Steering wheel controls (if equipped)
    Radio control features VOL + (Volume): Press to increase the volume. VOL – (Volume): Press to decrease the volume. (Seek): Press to select the previous/next radio station preset, CD track or ...

    Vehicle Dynamics Control operation indicator light
    The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE - The light may remain illuminated for a short pe ...

    Scan
    This function plays the first ten seconds of each track/audio file. To start scanning: 1. Press OK/MENU. 2. Turn TUNE to Scan. > The first ten seconds of each track/ audio file will be playe ...