Volvo XC60: Introduction
The Driver Alert System is designed to help a driver who may be becoming fatigued or who is inadvertently leaving the lane.
The Driver Alert System consists of two different functions that can be switched on together or separately.
• Driver Alert Control (DAC)
• Lane Departure Warning (LDW), see
page 183
When one or both of the functions has been switched on, it is in standby mode and is activated when the vehicle exceeds a speed of 40 mph (65 km/h).
The function deactivates if the vehicle's speed goes under 37 mph (60 km/h).
Both functions use a camera that is dependent on the road/lane being clearly marked by painted lines on each side.
WARNING
The Driver Alert System does not function in
all situations and is designed to be a supplementary
aid. It is not, however, intended
to replace the driver’s attention and judgement.
Driver Alert Control (DAC)– introduction
This function is intended to alert the driver if his/her driving becomes erratic, such as if the driver is distracted or fatigued. NOTE The camera has certain limitations, see page 159. A c ...See also:
Downhill gradients
On long and steep gradients, you must reduce the load on the brakes by shifting
early to a lower gear. This allows you to take advantage of the engine braking effect
and helps avoid overheating ...
Engine
...
Search area
The navigation map database is divided into
countries, or geographically defined areas
within countries, called search areas. When
setting a route, the destination (or waypoint)
entered must be in ...