Subaru Forester: Inserting a disc in a desired position
1. Briefly press the button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink.
The positions in the magazine the indicator of which steadily lights up are already loaded with discs.
2. Press the disc select button (from to ) at the position where you want to insert a disc.
3. When the “LOAD” indicator illuminates, insert the disc. Once you have inserted the disc, the “LOAD” indicator will turn off. The disc will then be automatically drawn in, and the player will begin to play the first track on the disc.
- If you wish to insert another disc, repeat the procedure beginning with step 1.
If you do not insert any disc in 15 seconds after you have pressed the button, the player will begin to play back the first track of the last disc you have inserted.
- While the player is in the loading mode, if you press or button, the player will enter standby mode. Press the button to start playback.
How to insert a CD(s) (type B)
1. Briefly press the button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. If no i ...Loading all the magazine (full disc loading mode)
1. If you continue to press the button for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashes and ...See also:
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a cover for protection. The cover must
be removed before the wiper blade can be replaced. To remove the cover:
1. Slide a plastic tool under the cover and ...
Starting the engine
CAUTION Always wear appropriate shoes when operating your vehicle. Unsuitable
shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake
and accelerator pedal, and the clu ...
Heating and defrosting
Heating and defrosting
To direct warm air toward the floor and the
windshield:
1. Set the airflow control dial to the “”
position.
2. Set the temperature control dial to the
most com ...