Subaru Forester: Information display
Information display
1) Outside temperature indicator
2) Fuel consumption indicator
With the ignition switch in the “ON” position, the outside temperature and fuel consumption are indicated on the display.
For type A combination meter:
1) Information display switching knob
With the ignition switch in the “ON” position, each successive press of the information display switching knob toggles the display in the following sequence.
For type B combination meter:
The fuel consumption indicator is linked with the odometer/trip meter display on the combination meter, according to the following chart.
- Outside temperature indicator
- Current fuel consumption (if equipped)
- Average fuel consumption
- To turn off fuel consumption indicator display
Clock
Clock The clock shows the time while the ignition switch is in the “Acc” or “ON” position. The time changes by 1 minute each time the “+” button or “−” button is pres ...Outside temperature indicator
Outside temperature indicator 1) U.S.-spec. models 2) Except U.S.-spec. models The outside temperature indicator shows the outside temperature in a range from −22 to 1228F (−30 ...See also:
If the light illuminates steadily
If the light illuminates steadily while driving
or does not turn off after the engine starts,
an emission control system malfunction
has been detected.
You should have your vehicle checked by
...
Engine Block Heater — If Equipped
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
grounded three-wire extension cord.
...
Braking System Design
The hydraulic system that operates
the brakes has two separate circuits.
Each circuit works diagonally across
the vehicle (the left-front brake is
connected with the right-rear brake,
etc.). ...