GMC Terrain: How the System Works - Lane Departure Warning (LDW) - Object Detection Systems - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: How the System Works

The LDW camera sensor is on the windshield ahead of the rearview mirror.

To turn LDW on and off, press the LANE DEPART control on the steering wheel.

To turn LDW on and off, press the LANE DEPART control on the steering wheel. The control indicator will light when LDW is on.

When the vehicle is started, the LDW indicator on the instrument panel will come

When the vehicle is started, the LDW indicator on the instrument panel will come on briefly.

LDW operates at speeds of 56 km (35 mph) or greater. If LDW is on, the LDW indicator will appear green if the system detects a left or right lane marking. This indicator will change to amber, flash, and three beeps will sound if the vehicle crosses a detected lane marking without using the turn signal.

To change the volume of the warning chime, see “Chime Volume” under Vehicle Personalization on page 5‑33 for more information.

    Lane Departure Warning (LDW)
    For vehicles with this feature, read the entire section before using it. WARNING The LDW system does not steer the vehicle and is an aid to help the vehicle stay in the driving lane. The LDW syste ...

    When the System Does Not Seem To Work Properly
    If the LDW symbol does not appear: ○ The lane markings on the road may not be seen. ○ The camera sensor may be blocked by dirt, snow or ice. ○ The windshield may be damaged. ` ...

    See also:

    Automatic Transmission Fluid
    Check the fluid level with the engine at normal operating temperature. 1. Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the en ...

    Compass
    The vehicle may have a compass display on the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, ...

    Automatic switch off
    Cruise control will switch off but the set speed will remain in the memory when: - The CAN button (3) is pressed. - The brake pedal is pressed. - Speed falls below 30km/h (18mph). - Neutral, Park ...