Nissan Rogue: Heater operation
Heating:
This mode is used to direct heated air to the foot outlets.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
Ventilation:
This mode directs outside air to the side and center ventilators.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets to defrost/defog the windows.
1. Turn the air flow control dial to the position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control 
dial to the
desired position between the middle and the
hot (right) position.
- To remove frost from the outside surface of
the windshield quickly, turn the temperature
control dial to the maximum hot position and
the fan speed control 
dial to
maximum
(HI) position.
- If it is difficult to defog the windshield, turn the A/C button on.
Bi-level heating:
This mode directs cool air from the side and center vents and warm air from the foot outlets.
When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Heating and defogging:
This mode heats the interior and defogs the windows.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control 
dial
to the
desired position.
3. Turn the temperature control dial to the desired position.
Controls
Outside air circulation:
Push the air recirculation button to turn off the
indicator light on the button. The air flow is
drawn from outside the vehicle.
Air recirculation:
Push the air recircu ...
Air conditioner operation
The air conditioner system should be operated
for approximately 10 minutes at least once a
month. This helps prevent damage to the air
conditioner system due to the lack of lubrication.
Cooling ...
See also:
Ordering Additional Owner’s Literature
To order the publications in this portfolio, contact Helm, Incorporated at:
HELM, INCORPORATED
P.O. Box 07150
Detroit, Michigan 48207
Or to order a free publication catalog, call toll free: 1-80 ...
Handling of compact discs
● Use only the type of compact discs that have the mark shown in the illustration
below (playback of CD-R or CDRW discs may cause problems).
● The use of special shaped, damaged c ...
Belt warning for the driver and front passenger
Regardless of whether the driver and front passenger have fastened their seat
belts already, the seat belt warning
lamp lights up for 6 seconds after every engine start. It then goes out if the d ...
