Subaru Forester: Headlight flasher - Light control switch - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Headlight flasher

Headlight flasher
Headlight flasher

To flash the headlights, pull the lever toward you and then release it. The high beam will remain on for as long as you hold the lever. The headlight flasher works even though the light switch is in the “OFF” position.

When the headlights are on high beam, the high beam indicator light “the” on the combination meter also illuminates.

Do not hold the lever in the flashing position for more than just a few seconds.

    High/low beam change (dimmer)
    High/low beam change (dimmer) To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the c ...

    Daytime running light system (if equipped)
    The brightness of the illumination of the high beam headlights is reduced by the daytime running light system. The light switch must always be turned to the “” position when it is ...

    See also:

    Foot brakes
    Do not rest your foot on the brake pedal while the vehicle is in motion. Never allow the vehicle to coast (freewheel) with the engine turned off. The engine must be running to provide full bra ...

    Instrument Panel
    ...

    Fuel requirements
    Gasoline engine (unleaded) Your new Kia vehicle is designed to use only unleaded fuel with a minimum Octane Rating of 87 Anti- Knock Index (AKI). NOTICE NEVER USE LEADED FUEL. The use of leaded fue ...