Mitsubishi Outlander: Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency. The hazard warning flashers can always be operated, regardless of the position of the ignition switch. Push the switch to turn on the hazard warning flashers, all turn signal lamps flash continuously. To turn them off, push the switch again.
Turn-signal lever
1- Turn-signals. When making a normal turn, use position (1). The lever will return automatically when cornering is completed. 2- Lane-change signals. When moving the lever to (2) slightly to ch ...Fog lamp switch
Front fog lamp switch* The front fog lamps can be operated while the headlamps and tail lamps are on. Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator lamp i ...See also:
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles,
latch plates, retractors, and anchorages are all working properly. Look for any
other loose or damaged safety belt s ...
Steering wheel keypad
The keypad varies according to the vehicle's equipment
1 Turn the thumb wheel to go up/down
among menu selections. Press the thumb
wheel to make a selection or store a function
in the system' ...
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fus ...