Ford Escape: Fuel pump shut-off switch
This device stops the electric fuel pump from sending fuel to the engine when your vehicle has had a substantial jolt.
After an accident, if the engine cranks but does not start, this switch may have been activated.
This switch is located in the front passenger’s footwell, behind a flip-up cover, by the kick panel access cover.
To reset the switch:
1. Turn the ignition to the off
position.
2. Check the fuel system for leaks.
3. If no leaks are apparent, reset the
switch by pushing in on the reset
button.
4. Turn the ignition to the on
position.
5. Wait a few seconds and return
the key to the off position.
6. Make another check for leaks.
Hazard Flasher Control
The hazard flasher is located on the steering column, just behind the steering wheel. The hazard flashers will operate when the ignition is in any position or if the key is not in the ignition. ...Fuses and relays
...See also:
Important safety notes
You can limit the opening angle of the tailgate. This is possible in the top
half of its opening range, up to approximately 8 in (20 cm) before the stop.
Limiting the opening angle can be useful if ...
Bluetooth® version
For information about the Bluetooth® version
installed in the vehicle, go to Phone menu
Phone settings
Bluetooth software
version in car. ...
Tv/my video media inhibit with vehicle moving
When the vehicle is moving the video picture
will automatically be inhibited. The touch
screen will display the TV/My video screen and
the relevant safety message will be displayed. If
Dual view i ...