Toyota RAV4: Flattening front seatbacks
The front seats can be moved into a flat seat arrangement.
Manual seat
1 Slide the second seats as far back as possible.
2 Remove the front head restraint.
Slide the front seat further forward than the front-most lock position.
Pull the seatback angle adjustment lever up to unlock and push down the seatback. After returning the seat to its original position, be certain to replace the head restraint.
Power seat
1 Slide the second seats as far back as possible.
2 Remove the front head restraint.
Push the seat position adjusting switch forward to slide the seat to the front-most position.
Move the seatback angle adjusting switch backward to flatten the seatback. After returning the seat to its original position, be certain to replace the head restraint.
Front seats
Manual seat
1 Seat position adjustment
lever
2 Seatback angle adjustment
lever
3 Vertical height adjustment
lever (driver’s side only)
Power seat (driver’s side only)
1 Seat position a ...
Active head restraints
When the occupant’s lower back
presses against the seatback
during a rear-end collision, the
head restraint moves slightly forward
and upward to help reduce
the risk of whiplash on the seat
...
See also:
Replacement Parts
The emissions control systems are
designed and certified to work together
in reducing emissions to
levels that comply with the Clean Air
Act. To make sure the emissions
remain low, you shoul ...
Shutting the Engine Off After a Remote Start
To shut off the engine:
○ Press until the parking lamps
turn off.
○ Turn on the hazard warning flashers.
○ Insert the key and turn it to ON/ RUN and then back to LOCK/OFF. ...
Checklist before driving off-road
If the engine oil warning lamp lights up while the vehicle is in motion, stop
the vehicle in a safe place as soon as possible. Check the engine oil level. The
engine oil warning lamp warning mu ...
