Nissan Rogue: Exterior and interior lights
*: See a NISSAN dealer for replacement.
NOTE: Always check with the Parts Department at a NISSAN dealer for the latest information about parts.
Replacement procedures
All other lights are either type A, B, C, D or E.
When replacing a bulb, first remove the lens and/or cover.
Front turn signal/park/side marker light (Halogen
headlight model)
Xenon headlight model: See a NISSAN dealer for replacement.
Halogen headlight model: Remove the bulb as illustrated.
Front fog light
Rear combination light (stop/tail/side marker/turn)
Open the lift gate to remove the rear combination light assembly.
A : Clip
Back-up light
Open the lift gate to remove the back-up light assembly. One screw is located behind the cover on the lift gate.
License plate light
The license plate light bulb can be accessed by removing the cover on the inside of the lift gate.
Front map light
Cargo light
Ceiling light
Vanity mirror light
Headlights
1. Headlight (high-beam)
2. Front turn signal/park/side marker light
3. Front map light
4. Ceiling light
5. Front fog light
6. Headlight (low-beam)
7. High-mounted stop light
8. Cargo ...
Wheels and tires
If you have a flat tire, see “Flat tire” in the
“6. In case of emergency” section. ...
See also:
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you, to switch the headlights back to low beam. ...
Compact Disc (CD) player operation
Place the ignition switch in the ACC or ON
position, and insert the CD into the slot with the
label side facing up. The CD will be guided
automatically into the slot and start playing.
After lo ...
Activating/deactivating the MONO function
This function is only available in vehicles for Canada.
You can use the MONO function to adopt the temperature and air distribution settings
on the driver's side for the front-passenger side.
...
