Hyundai Tucson: Hood release - Features of your Hyundai - Hyundai Tucson Owner's ManualHyundai Tucson: Hood release

1. Pull the release knob to unlatch the hood.

1. Pull the release knob to unlatch the hood.

2. Push the secondary latch lever to the left and

2. Push the secondary latch lever to the left and lift the hood.

3. Hold the hood open with the support rod.

3. Hold the hood open with the support rod.

Before closing the hood, return the support rod

Before closing the hood, return the support rod to its clip to prevent it from rattling. Lower the hood until it is about 1 ft. (30 cm) above the closed position and let it drop. Make sure that it locks into place.

CAUTION: Make sure that the support rod has been released prior to closing the hood.

WARNING: o Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident. o The support rod must be inserted completely into the hole provided in the hood whenever you inspect the engine compartment. This will prevent the hood from falling and possibly injuring you. o Do not move the vehicle with the hood in the raised position, as vision is obstructed and the hood could fall or be damaged.

    Remote fuel-filter lid release
    The fuel-filler lid may be opened from inside the vehicle by pulling up on the fuel-filler lid opener located on the front floor area on the left side of the vehicle. NOTE: If the fuel-fill ...

    Floor mat anchor
    Floor mat anchor When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor in your vehicle. This keeps the floor mat from sliding forward. WARNING: o ...

    See also:

    To Change or Select Files
    Use the SKIP button while a USB flash memory device is playing to change files. SKIP - Each time you press and release (preset 6), the player skips forward to the beginning of the next fi ...

    Washing
    Wash dirt off the vehicle with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, ...

    Tire and Loading Information Label
    Label Example A vehicle specific Tire and Loading Information label is attached to the vehicle's center pillar (B-pillar). With the driver's door open, you will find the label attached ...