Subaru Forester: ECO gauge (models with type A combination meter)
The unit displayed varies depending on the model.
The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel efficiency as shown in the following chart.
NOTE
- The ECO gauge shows only an
approximate indication of fuel efficiency.
- After resetting the trip meter, the average rate of fuel consumption is not shown until driving 0.6 mile (1 km).
Until that time, the ECO gauge does not operate.
Temperature gauge (models with type A combination
meter)
1) Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the “ON” position.
The coolant temperature will vary in
accordance with ...
Warning and indicator lights
Several of the warning and indicator lights
illuminate momentarily and then turn off
when the ignition switch is initially turned
to the “ON” position. This permits checking
the operation ...
See also:
Radio Frequencies
The radio can receive the complete
AM and FM bands.
Those bands cover these frequencies:
AM band: 530 to 1,710 kHz
FM band: 87.7 to 107.9 MHz
Radio stations on the AM band are
assigned frequen ...
Enabling And Disabling Parksense
ParkSense can be enabled and disabled with a switch
located in the switch bank of the instrument panel or
through the Customer-Programmable Features section of
the EVIC. The available choices ar ...
Before Driving Off-Road
○ Have all necessary maintenance and service work completed.
○ Fuel the vehicle, fill fluid levels, and check inflation pressure in all tires,
including the spare, if equipped.
○ ...
