Jeep Liberty: Seat Belt Lock Out
The center rear seat belt system has a lock out feature that will not allow you to extract the center webbing unless the rear seat upper latch is engaged.
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/
shoulder belt.
1. Position the latch plate as close as possible to the
anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...
Seat Belts In Passenger Seating Positions
The seat belts in the passenger seating positions are
equipped with Automatic Locking Retractors (ALR)
which are used to secure a child restraint system. For
additional information, refer to “ ...
See also:
Removing/installing the headlamp cover
You must remove the headlamp cover in the engine compartment before you can replace
the bulbs in the headlamp.
To remove: press retaining clip 1 in the direction of the arrow.
Pull cover 2 f ...
To close the moonroof
Push the switch to the “CLOSE” side then
quickly release it to close the moonroof.
The moonroof will stop at a position 8 in
(20 cm) away from the fully closed
position. Push the switch aga ...
Closing
WARNING
Monitor the closing procedure carefully to make sure no one is in danger of being
injured. To prevent possible personal injury, always keep hands and fingers away
from the cargo comp ...
