Toyota RAV4: Downhill assist control system
With the downhill assist control system, the vehicle is able to descend a steep hill while maintaining a constant low speed of about 3 mph (5 km/h) without brake pedal operation.
■ Activating the downhill assist control system
Press the “DAC” switch. The downhill assist control system indicator will come on to indicate that the downhill assist control system is activated. Pressing the switch again turns the system off.
Hill-start assist control
Hill-start assist control helps to prevent the vehicle from rolling
backwards when starting on an incline or slippery slope.
To engage hill-start assist control,
further depress the brake
pedal ...
While the downhill assist control system is operating
The slip indicator will flash to
indicate that the downhill assist
control system is operating, and
the stop lights and high mounted
stoplight will turn on.
■Conditions in which the downh ...
See also:
Cup holders
- Avoid abrupt starting and braking
when the cup holder is being used
to prevent spilling the drink. If the
liquid is hot, it can scald you or your
passenger.
- Use only soft cups in th ...
Selecting a magnetic zone
Magnetic zones.
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the compass
to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar obje ...
Installing a Child Seat with a Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seatback,
and the center seating positio ...
